|
HP PERFORMANCE 1985-1996 C4 CORVETTE
STAGE I, II and III
CORVETTE TURBO KIT

500 hp 611 torque @ 8 psi
We are pleased to
offer HP Performance turbo
systems for the 1985-1996 Corvette C4. As our many satisfied
customers will attest, HP turbo systems are the most complete systems on the
market and provide the best turbocharger system value available today. These systems feature the
same caliber of high quality and outstanding performance of all HP
Performance turbo systems in a package built specifically
for the fourth generation Corvette. HP turbo systems offer very mild street manners and incredible amount of
horsepower on demand.

(Intake tube shown above will also be coated with standard polished aluminum
finish Jet Hot ceramic coating)
The HP turbo systems are offered in three
versions. The Stage I system comes standard with a 60mm turbo and will
support about 600 rwhp. This system can be installed on a stock L98 or
LT1 engine, although it should be run at conservative boost levels due to the
high compression and design strength of the these engines. The Stage II
system comes standard with a 67mm turbo,
will support 700-750 rwhp, and will require engine modifications such as lower
compression pistons, better rods, etc. in order to utilize the full potential
of the kit. The Stage III system comes standard with a 76mm turbo, will
support 800-850 rwhp and will require more extensive engine modifications.

500 rwhp 611 rwtq @ 8.5 psi

The following is a list of the
major components included in the Stage I turbo system:
60mm Garrett
turbocharger with Jet Hot "Sterling" ceramic coated turbine housing (rated to
600 rwhp)
CNC mandrel bent Jet Hot "Sterling"
ceramic coated 1.75" primary tube tubular exhaust headers
CNC mandrel-bent Jet Hot "Sterling" ceramic
coated header-turbo tube CNC mandrel-bent Jet Hot "Sterling" ceramic
coated crossover tube
CNC mandrel-bent Jet Hot "Sterling" ceramic
coated
turbo-intercooler tube CNC mandrel-bent Jet Hot "Sterling" ceramic
coated intercooler-mass
air tube
CNC mandrel-bent Jet
Hot "Sterling" ceramic coated
custom downpipe
44mm Tial
Billet Aluminum Wastegate
Bosch blow off valve
Eight (8) 42# Fuel Injectors
255 lph in-tank fuel pump
Custom-Built Tig-Welded Aluminum 3-row, Dual
Inlet, Single Outlet Intercooler Battery Relocation Kit Custom air filter
Stainless Steel Braided Turbo Oil Supply Line and fittings Turbo Oil Drain Line
and Fittings 3-ply Silicone Couplings and Transition Hoses Custom Heat Shielding Stainless Steel V-band Clamps Stainless Steel T-bolt Clamps
.....and everything else
needed for the installation and enjoyment
of the ultimate turbo system on your C4 Corvette !!!!
"The 60mm turbo used in the HP kit
provides near-immediate boost response and tire-annihilating low-end torque.
Anyone who has ever driven a modified 427 or 454 big-block Vette will
immediately recognize the huge shove in the backside available from the HP-blown
L98." - VETTE
Magazine - "C4 Tire Fryer: HP Performance
L98 Turbo Kit"

Click here to read the article in VETTE magazine about this turbo system
THIS SYSTEM IS COMPLETELY
UPGRADEABLE TO ACHIEVE MORE HORSEPOWER/TORQUE
Upgrading this system is as easy as ordering a larger turbo,
fuel system upgrades, custom exhaust, etc. Engine modifications will be
required to realize the full potential of the Stage II and Stage III system.
System upgrades available include the following extra-cost options:
Stage II 67mm turbo (rated to 700-750 rwhp)
Stage II Fuel system upgrade (larger injectors, fuel pump, etc.)
Stage II Clutch package or torque converter
Stage III 76mm turbo (rated to 800-850 rwhp)
Stage III Fuel system upgrade (larger injectors, fuel pump, etc.)
Stage III Clutch package or torque converter
In-car electronic boost controller
Polished billet aluminum blow off valve
Polished turbo compressor housing
3.5" Turbo downpipe (tight fit)
Matte black Jet Hot ceramic coating on piping.
We also offer engine packages to compliment
the Stage II, Stage III systems. Call us for current pricing on the above upgrade options
or engine packages.
1985-1996 CORVETTE TURBO SYSTEM OPTIONS AND PRICING
|
OPTION |
DESCRIPTION |
PRICE |
|
C4-8596-1 |
1985-1996 CORVETTE C4 STAGE I 60mm TURBO SYSTEM |
$4,495.00 |
|
C4-8596-2 |
1985-1996 CORVETTE C4 STAGE II 67mm TURBO SYSTEM |
$4,995.00 |
|
C4-8596-3 |
1985-1996 CORVETTE C4 STAGE III 76mm TURBO SYSTEM |
$5,345.00 |
|
C4-3.5DP |
3.5" TURBO DOWNPIPE |
$250.00 |
|
T50MMBOV |
TIAL 50MM BLOW OFF
VALVE UPGRADE |
$200.00 |
|
FIU-50 |
50# FUEL INJECTOR
UPGRADE |
$200.00 |
|
FIU-60 |
60# FUEL INJECTOR
UPGRADE |
$325.00 |
|
FIU-75 |
75# FUEL INJECTOR
UPGRADE |
$400.00 |
|
C4-MBCC |
MATTE BLACK FINISH
CERAMIC COATING |
$250.00 |
|
EBC-G |
ELECTRONIC IN-CAR BOOST CONTROLLER |
$380.00 |
|
MBC |
MANUAL
BOOST CONTROLLER |
$100.00 |
|
BABOV |
BILLET ALUMINUM BLOW OFF VALVE |
$75.00 |
|
PTCH |
POLISHED TURBO COMPRESSOR HOUSING |
$80.00 |
|
C4-INJDEL |
INJECTORS DELETE |
-$220.00 |
|
C4-FPDEL |
FUEL PUMP DELETE |
-$75.00 |
|