HP PERFORMANCE TURBOCHARGER KITS

SCROLL DOWN TO BOTTOM OF THIS PAGE FOR LINKS TO MORE WEBSITE PAGES

HP PERFORMANCE 1994-1995 MUSTANG GT & COBRA
STAGE I, II and III TUNER MUSTANG TURBO KIT

(Note:  Turbo and air filter shown in photo are not included in Tuner Kit)

The HP 94-95 Streeturbo Tuner Kit consists of 1 ¾'' primary tubular headers CNC mandrel-bent from 14 gauge mild steel. The flanges are laser cut 3/8'' mild steel.  The primary tubes merge into a 3'' collector, from there a 3'' cross over tube y's into the other collector on its way to the turbocharger.  The spent gases then go thru a 3.5'' down pipe which splits into dual 3'' after the transmission cross member and then connects to any cat back that is in the factory position.  Starting from the turbo discharge on the cold side, a 3'' tube connects the turbo to the top of the intercooler.  After passing through the custom-built aluminum intercooler, the air goes through another 3'' tube into a C&L MAF (not included in kit) and then to the throttle body.  All tubing is CNC mandrel bent on a 5'' radius and is Jet Hot ceramic coated in their "Sterling" finish (looks like highly polished aluminum).  All connections on the exhaust side are made using stainless steel V-band clamps.  On the cold side, the connections are 3-ply silicon hose fastened with stainless steel T-bolt clamps.  This kit will mount a 60mm turbo, 66mm turbo or 76mm turbo with a four-bolt exhaust housing base flange and 3.5" V-Band downpipe clamp.  The kit comes with a Tial 44 mm wastegate and a Bosch blow off valve.  Kit carries a 1-year parts and workmanship warranty, a 3-year ceramic coating warranty and a limited lifetime warranty on the tubing

   TUNER KIT COMPONENTS

1 - Jet-Hot^® Sterling^® ceramic-coated driver-side header with band clamp flange.
1 - Jet-Hot^® Sterling^® ceramic-coated passenger-side header with band clamp flange.
1 - Jet-Hot^® Sterling^® ceramic-coated crossover tube with waste gate fitting and clamp flanges.
1 - Jet-Hot^® Sterling^® ceramic-coated upper downpipe with band clamp flange.
1 - Jet-Hot^® Sterling^® ceramic-coated lower downpipe with 3 hole exhaust flange.
1 - Jet-Hot^® Sterling^® ceramic-coated mass air to intercooler tube, beaded for hose couplings.
1 - Jet-Hot^® Sterling^® ceramic coated turbocharger to intercooler tube with blow off valve fitting and beads.
1 - Jet-Hot^® Sterling^® ceramic-coated throttle body to mass air meter tube with beads.
1 - Jet-Hot^® Sterling^® ceramic-coated intermediate pipe with bracket.
1 - Jet-Hot^® Sterling^® ceramic-coated exhaust y-pipe.
1 - 25" x 14" x 3½", 3-row Aluminum custom intercooler assembly.
1 - Intercooler bracket.
1 - Tial 44 mm waste gate.
1 - Turbocharger system waste gate gasket.
1 - 1/8 MPT-1/4 waste gate hose fitting.
1 - Turbocharger oil inlet fitting.
1 - Turbocharger oil outlet hose.
2 - Turbocharger oil outlet hose fittings.
1 - Turbocharger oil inlet hose assembly.
1 - Turbocharger oil inlet fitting - turbocharger side.
1 - Pressure port tee.
1 - Oil tee extension.
2 - 5/16" waste gate bolts.
2 - 5/16" waste gate nuts.
2 - 5/16" Waste gate lock washers.
1 - Bosch blow-off valve.
1 - 1” Blow off valve hose.
2 - 1” Blow off valve hose clamps.
4 - 3” Hose couplings.
1 - 3½” Hose coupling.
1 - 2½" to 3” transition hose coupling.
9 - 3” T-bolt clamps.
1 - 2½” T-bolt clamp.
2 - 3½” T-bolt clamps.
2 - 3” V-Band clamps.
1 - 3½” V-Band clamp.
6 - 3/8” Bolts.
6 - 3/8” Nuts.
6 - 3/8” Lock washers.
1 - 3’’ band clamps.
2 - 2½’’ U-bolt exhaust clamps.
1 - 3½’’ Band clamp.
2 - 3” U-bolt exhaust clamps.

PRICE $3,495.00 complete