NEW/USED SPEED STUFF
FOR SALE, TRADE OR WANT TO BUY

SCROLL DOWN TO SEE LISTINGS

This page is provided as a FREE service for you to list the new/used speed stuff you have for sale or wish to buy.  If you wish to list something, please fill out the form below and we will post it for you.

FOR SALE:  Land and Sea DYNOmite 800-hp Engine Dynamometer.  This complete dyno system has an optional computer-controlled electronic servo load valve that allows dyno to be set up for peak hp pulls, rpm sweep pulls or steady-state extended runs.  Excellent for tuning, emissions testing or engine break-in.  Dyno system includes shaft-mount 13" toroid water brake absorber, strain gauge-equipped torque arm, DYNOmite-Pro data acquisition panel mount computer, computerized electronic rpm servo load control valve, 28-channel data harness, mobile engine stand, wall or stand mount control console w/throttle, oil pressure gauge, water temperature gauge, boost gauge, gas fuel pressure gauge, power switch, start switch, manual load knob, bell housing adapter plate, 1-3/8" x 10-splined clutch input shaft, adjustable thermostatically controlled cooling tower with top-mounted temperature gauge and vent screw, EGT (Exhaust Gas Temperature) option for four separate source temperatures, including four screw-in fast acting thermocouples and EPROM software functionality, dual strain gauges, Chevrolet 454 backswept headers, Chevrolet bell housing, water brake absorber mounting adapter ring for Chevrolet bell housing, Ford 460 backswept headers with four EGT fittings on one header, Ford bell housing, water brake absorber mounting adapter ring for Ford bell housing, Ford 460 upswept headers with Y-pipe and single exhaust extension, water brake absorber mounting adapter ring for Mopar bell housing, multi-pattern flywheel adapter plate to fit Ford, Chevrolet and Chrysler bolt patterns, water brake drain hose extensions, MSD 6AL ignition module configured for Ford 460 distributor and Blaster II coil, in-line electric gasoline fuel pump, battery rack, adjustable click-pin mounting hardware, stainless steel braided drain hoses with aircraft fittings, 225 gallon molded polyethylene water tank with float valve for automatic fill and shutoff, 1-hp Goulds electric centrifugal water transfer pump, and installation and operation manual.  Purchased new in August, 2000.  Approximately 100 hrs. total run time, only 10 hrs. since factory refurbishment and recalibration, excellent condition.  This dyno can be operated as a portable unit for convenience or could be permanently installed in a dedicated dyno cell.  Cost to replace this dyno as offered is $21,400 (with upgrades and accessories included in sale).  Make me an offer (please be realistic and don't waste either of our time with low-ball offers) by calling 505-623-1304 or email to info@turbochargedpower.com. (Click on thumbnails to enlarge photos)

(Click on Thumbnails to enlarge photos)

FOR SALE:  1998 Twin Turbo Cobra with 823HP and 74K original miles.  MMR 4.6 street MOD 900 short block. Manley platinum 18cc dish pistons. All put together with ARP fasteners. Stage 1 DOHC port job, High Performance valve spring kit. IMRC plates modified. FAST, 83lb fuel injectors. 90mm Lightning MAF, MSD Digital DIS-4 Multi Channel ignition unit with MSD wires, blaster coils and tach adapters. McLeod Street Twin disc clutch. MMR Street/Strip 900 fuel system. HP Performance Twin Turbo Stage II intercooled system with upgraded 57 mm turbochargers and upgraded waste gates. Snow Performance Boost Cooler stage -2 MAF system.  QA1 caster/camber plates, K-member and A-arms. Tokico Illumina 5-way adjustable struts with coilovers.  Inland Empire Driveline 3-1/2" driveshaft.  Granatelli lower control arms.  Lakewood bell housing. Stewart Warner white face boost & fuel pressure gauges. Total for parts listed above $19,049.   Motor, Turbo system and Parts listed above were installed on 03/2005 with 64K original miles.  On 12/15/07 the car was re-tuned by Brian Anderson at Anderfab Racing, resulting in 716.1 RWHP and 642 RWTQ.  In 2008, a TKO 600 racing transmission with new 26 spline clutch discs was installed along with a new black top and a brand new Jet Black paint job totaling $5,300.  Recent changes: Maximum Motorsports powder coated long sub-frame connectors, polyurethane pinion snubber, Pro 5.0 shifter, Strange 8-way adjustable shocks, Nitto 555R 315/35/17 drag radials and Ecsta 255/40/17, URP firewall adjuster, clutch cable and speed release quadrant, Two new HP Performance fuel pumps, Energy suspension polyurethane transmission mount, Rack & Pinion offset bushing with front end alignment and 1998 Mustang factory shop manual including a separate wiring manual. Total for recent above parts installed - $1,390 and they were installed on 03/2008 with 74K original miles.  I do have all the receipts and documentation on this car. Asking $21,500. If you have any questions Call 912-657-0645 or 912-754-9455.

     
(Click on thumbnails to enlarge photos)

FOR SALE:  1993 Mustang LX Convertible.   Auto with PL, PW, W/O AC.  Has 306 Motor with Edelbrock Performer aluminum heads, Edelbrock upper and lower intake, forged pistons, ARP engine bolt kit, 24 lb injectors, 75mm Throttle body, underdrive pulley's, MSD ignition, MAC exhaust, 3200 stall, Boyd 17 in rims, new big shot NOS system, new pearl white paint, new top. Car is very clean and very fast.  Asking $8000.  Have receipts for everything in car, too much more to list, any questions, contact Richie at 718-440-2054 or email to richie32nyc@yahoo.com.

           
(Click on thumbnails to enlarge photos)

FOR SALE:  1997 Twin Turbo Corvette.  VERY FAST.  Car has an HP Performance Stage II Twin Turbo System, 408 c.i. fully forged iron block, custom fuel system, and a multitude of upgrades; car made 915 rwhp @ 15 psi.  For a complete list of upgrades, click on this link:  http://turbochargedpower.com/1997%20C5.htm.  Asking $50,000.  Call Jerimiah at 520-730-0655 or email to: jtaylor@casassfs.com

FOR SALE:  Kenne Bell Supercharger and accessories.  Ok guys, this is a great deal if I've ever seen one. I am looking to sell my blower and all related equipment to complete the swap to twin turbos. The components I'm selling are as follows:

2.4 Kenne Bell Polished Supercharger (paid $4600 new) - $3500

3.0, 3.25, 3.5, and 4.0 upper KB pulleys - $30 individually or $100 for all

2, 4, 6lb Metco Lowers - $40 individually or $100 for all

Billetflow Auxillary Idler with 92mm pulley - $50

3 Billetflow Idler pulleys 92mm - $30

Metco lower pulley kit (bracket, spacers) - $300

Front blower cage (what the idlers/tensioner is mounted to) - $100

2 blower belts (they are the only size I needed for both street and race setups) - make offer

Lower intake manifold (What blower mounts to) - $300

Brand new Alternator (less than 2K miles) - $150

Intercooler - $300

Intercooler pump - $180

Gords H/E with fans - $650

PFAB polished reservoir - $150

Custom 5/8" aluminum Fuel rails - $250 or will keep with blower

Carbon Fiber inlet tube 95mm-120mm - $175

Still have an untouched factory Eaton blower as well >2K miles - $450

Factory Fuel rail with 39lb injectors >2K miles - $150

Factory 10 spline input shaft - make offer

Factory H-pipe - $50

Factory in dash 6 disc changer - $50

Steeda quick quadrant - $20

All the above is off of an 04 Cobra that makes 620 rwhp. Going turbo, so i don't need any of this stuff.

You can see photos here: http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=64475

To ask questions or arrange for your purchase, please contact Garry at 229-740-4417 or email to: garrylaub@hotmail.com; garry.laub@moody.af.mil,

     
(Click on thumbnails to enlarge photos)

PRICE REDUCED!  FOR SALE:  2002 S281 Saleen Supercharged 4.6 show car.  White with white rims, black interior, Magnaflow w/X-pipe, the rest is stock. Garage kept, never seen rain.  Will trade for '03 or '04 Cobra.  Call 828-391-0729 for questions.  Have pics if interested.  Asking $27,900 o.b.o.  Aaron @ 828-391-0729 or email to lisamcvey@bellsouth.net.

FOR SALE:  2004 Torch Red Cobra.  28.5K miles. The car has black suEde inserts a triple gauge pod with AEM wide band, Autometer carbon oil pressure and boost/vacuum. The car also has a stock straight axle out of a 2004 GT. Now the good stuff. It is equipped with an HP Twin Turbo Kit, twins 57mm turbos with an '99/'01 cobra upper/lower intake manifold. Upper is painted black with a red cobra snake emblem. The car has one tune and it made 672rwhp and 670 rwtq on 93 pump gas at 15.5 lbs of boost on a stock '04 cobra engine. Just installed a Centerforce billet flywheel, DFX clutch 26-spline, 26-spline input shaft, Ford tob, 2 Turbonetics Raptor BOVs and Fidanza clutch adjuster. Car also has a Tri-ax shifter brand new BFG drag radials and Magnaflow exhaust. The car is in like new condition and also has black bullet wheels, 18x9 and 18x10, and tinted tail lights. If any interest this would be the way to go.  Car is in Davenport, IA.  Asking $32,000 OBO.  Erik McDonald, email is pimmac20@netscape.net, phone 563-320-4904

FOR SALE:  4-lug 31-spline Strange axles with C-clip eliminators.  I've decided to go with 5-lug.  I will trade for 5-lug 31-spline or sell the 4-lug axles for $175.00.  The axles fit fox body.  Any other questions you can email me (Derek) at derek.stang@yahoo.com.  I also have two '98 5-lug cobra wheels that are 16" in good shape $60.00.

     
(Click on thumbnails to enlarge photos)

FOR SALE:  Two (2) NEW Weld Racing "Drag-Lite" wheels.  Mounted but never raced.  Dimensions are as follows: 15x12 with 3.5 RS 5-lug 4.5 mounted on new M/T 29.5x10.5 W's, great set-up for a mini-tub.  For more info, call Henry @ 407-923-4052 or email to Henrylaureano@vermeersoutheast.com  $600.00

FOR SALE:  Brand new 96-04 HP Performance Stage 2 Twin Turbo System.  It has the Stage 2 57mm turbos, everything is brand new, never been mounted on a vehicle.  Includes 38mm Tial wastegates, electronic boost controller, a-pillar boost, fuel pressure gauges.  I am asking $5800 for the kit.  Contact Nate @ 706-662-9130 or email airborne_ranger1998@yahoo.com.

FOR SALE:  UPR Pro-Series Rear Suspension Package (' 79-'04 Mustang) and Triple Hook Quadrant & Cable with Double Lock Firewall Adjuster ('82-'04 Mustang ).  Suspension package includes:

1. Chrome-moly Adjustable Race Lower arms
2. Chrome-moly double adjustable race upper arms
3. Chrome-moly Anti-Roll bar with bearings
4. 7075 Billet Spherical housing bushing kit
NOTE:  Anti-Roll bar will NOT work with stock tailpipes!

This is a $690 value; I am asking $500.  All parts are brand new still in packaging.  You can go here to check the items out on UPR's website:

http://www.uprproducts.com/shopping/shopexd.asp?id=141
http://www.uprproducts.com/shopping/shopexd.asp?id=181

Will arrange for local pickup or I will ship it to you at your expense.  Contact Nate Ayers @ 918-258-9935 or email to airborne_ranger1998@yahoo.com.

FOR SALE:  1993 Black/Black/Black 5.0 Mustang 5-speed Convertible.  Excellent condition stock car ready for an HP turbo kit.  Buy this car and you'll get a discount on an HP kit for it.  Contact hittheredline@hotmail.com or info@turbochargedpower.com, or call 575-623-1304.  Serious inquiries only.

FOR SALE OR TRADE: 1996 Cobra Convertible. White with a black top. The car has some problems, but it is a good car.  It needs a new top and some body work to make it a really nice car.  Its not beat up, but it has a spot on the driver side.  Modifications are under-drive pulleys, JLT cold air, and Lightning mass air. The car is a 5-speed and it has 127,000 miles. Looking for sale of trade.  I miss my Fox so let me know.  I'm asking $4750 obo.  Email to:  rayraysgt2000@yahoo.com or call 479-857-5041

WANTED:  Factory Ford intercooler/heat exchanger setup with pump and lines for a 03 04 Cobra.  If you have these and are interested in selling for a reasonable price please call me toll free during the day 9-5 M-F central time 1-866-333-6737  ask for Barry. old33auto@fairpoint.net

FOR SALE:  EATON M112 Supercharger  - This is just the main blower unit.  Good for custom supercharger set-up, asking 400$ or b/o e-mail Chad @ SVexor13@aol.com for offers or questions.

Provide a brief description of the item(s) you wish to buy/sell.  Your listing will be posted until the item is sold, so please let us know when your listing is no longer needed so we can delete it.  We reserve the right to edit all submissions for content and are not responsible for errors or inaccuracies.  This page is provided for your convenience, please don't abuse it by flooding us with everything in your garage!  Also, we don't allow posting by commercial sellers.

You may also include a link to any digital photos you wish to include in the listing, or you may email the photos to us at info@turbochargedpower.com.

Be sure to include your name, email address and/or phone number and price.  Submittals that do not include this information will not be listed.